LDH155 REEDMORAL Carburetor Assembly 7702087317A 7702087317S 770287317 for RENAULT EXPRESS

Product Overview

LDH155 is a brand-new REEDMORAL carburetor assembly manufactured for replacement-part supply. It is not used, remanufactured or represented as a vehicle-maker original component.

This page is indexed around the complete recorded reference identity and the researched application terms. Because similar-looking carburetor components may differ by suffix, calibration, connector, actuator, port or mounting configuration, the original number and physical sample remain the controlling ordering checks.

• Core application: RENAULT EXPRESS
• Condition: Brand new REEDMORAL replacement
• Verification date: 2026-09-05

Key Specifications / Configuration

OEM & Identification Numbers

Confirmed recorded primary reference: 7702087317A, 7702087317S

Confirmed recorded secondary reference: 770287317

Additional catalogue-supported candidate identification numbers: None added. No unverified seller-only number is presented as interchangeable.

Search-format variants (same characters with punctuation removed; not new interchange numbers): Use the exact punctuated reference shown above.

The confirmed references above are copied from the locked product record. Candidate numbers are separated deliberately and are included only when a manufacturer/supplier model set or multiple independent catalogues support the association. They must still be checked against the full original marking.

Application and Year Fitment Guide

The guide consolidates the recorded product data and catalogue research. Fitment varies by market, VIN or serial number, engine, production date, emissions package and physical configuration; it is not an unconditional interchange statement.

Physical Identification Checklist

• Match the complete carburetor number, casting/air-horn markings and suffix before ordering.
• Compare mounting flange, bore count, choke type, linkage direction, fuel inlet and vacuum/vent ports.
• Confirm engine, fuel type/calibration, transmission, emissions market and production date where applicable.
• Check jetting and adjustment against the vehicle/equipment service specification; visual similarity alone is not interchange proof.

Installation and Ordering Notes

• Flush the fuel line, replace contaminated filters and use the correct gasket/insulator before installation.
• Set float level, idle mixture, choke and linkage only to the applicable engine/service specification.
• Check for fuel and vacuum leaks after installation; final calibration may be required for altitude, fuel and engine condition.

Ordering rule: send the VIN/serial where available, the complete original part number and clear photographs of the original component whenever any suffix or configuration is uncertain.

Package Contents

One REEDMORAL carburetor component as photographed. Gaskets, seals, sensors, injectors, brackets, valves, studs and mounting hardware are included only when they are visibly shown in this product’s gallery or expressly listed in the order confirmation.

Research Sources and Confidence Boundary

• No independent authoritative public page was found for the exact recorded number during this run; only the locked internal record is used and no new interchange number is asserted.

Evidence boundary: Low to moderate: the locked identity and product-family relationship are retained, but no complete authoritative public fitment set was found; no unsupported interchange is asserted. Vehicle-name overlap, appearance similarity or a single seller listing is not used by itself to prove OEM interchange.

Additional Reference and Fitment Research

Research marker: Additional reference research 2026-09-12 | LDH155

Recorded searchable identity: 7702087317A, 7702087317S, 770287317

Application note retained for search and ordering: RENAULT EXPRESS

New catalogue-supported candidate identifiers: None added in this research pass.

• No new independent exact-number catalogue page was retained in this run; the existing evidence and locked reference identity remain controlling.

Verification boundary: possible or candidate identifiers are not confirmed interchange numbers. Match the full original number, suffix, VIN/engine or equipment serial, connector/linkage, ports, mounting pattern and product photographs before ordering.