J1167 REEDMORAL Electronic Throttle Body Assembly 977-601 67-6025 S20173 for 2012-2014 Edge L4 122 2.0L (1999cc) 2013-2014 Escape L4 122 2.

Product Overview

J1167 is a brand-new REEDMORAL electronic throttle body assembly manufactured for replacement-part supply. It is not used, remanufactured or represented as a vehicle-maker original component.

This page is indexed around the complete recorded reference identity and the researched application terms. Because similar-looking throttle body components may differ by suffix, calibration, connector, actuator, port or mounting configuration, the original number and physical sample remain the controlling ordering checks.

• Core application: 2012-2014 Edge L4 122 2.0L (1999cc) 2013-2014 Escape L4 122 2.0L (1999cc) 2012-2015 Explorer L4 122 2.0L (1999cc) 2012-2013 Focus L4 122 2.0L (1999cc) 2013-2013 Fusion L4 122 2.0L (1999cc) 2014-2018 Special Service Police Sedan L4 122 2.0L (1999cc) 2013-2017 Taurus L4 122 2.0L (1999cc) 2013-2016 MKT L4 122 2.0L (1999cc) 2013-2016 MKZ L4 122 2.0L (1999cc)
• Condition: Brand new REEDMORAL replacement
• Verification date: 2026-08-31

Key Specifications / Configuration

OEM & Identification Numbers

Confirmed recorded primary reference: 977-601, 67-6025, S20173, TB1168, CM5E9F991AD, CP9Z-9E926-A, 977601, 676025, CP9Z9E926A

Confirmed recorded secondary reference: No public secondary reference is listed; supplier-internal identifiers are intentionally excluded.

Additional catalogue-supported candidate identification numbers: None added. No unverified seller-only number is presented as interchangeable.

Search-format variants (same characters with punctuation removed; not new interchange numbers): 977601, 676025, CP9Z9E926A

The confirmed references above are copied from the locked product record. Candidate numbers are separated deliberately and are included only when a manufacturer/supplier model set or multiple independent catalogues support the association. They must still be checked against the full original marking.

Application and Year Fitment Guide

The guide consolidates the recorded product data and catalogue research. Fitment varies by market, VIN or serial number, engine, production date, emissions package and physical configuration; it is not an unconditional interchange statement.

Physical Identification Checklist

• Match every character of the original housing/OE number, including suffix letters and revision marks.
• Compare connector shape, pin count, keying and orientation; do not infer interchange from the vehicle name alone.
• Compare throttle-bore diameter, mounting-hole pattern, coolant/vacuum ports and actuator housing position.
• Confirm engine code, market, transmission/traction or cruise-control configuration where the catalogue distinguishes them.

Installation and Ordering Notes

• Clean the mating surface and use the correct new gasket or seal where specified; keep debris out of the intake.
• Follow the vehicle service procedure for torque, coolant/vacuum connections and electronic throttle relearn/adaptation if required.
• Do not manually force an electronic throttle plate unless the service procedure expressly permits it.

Ordering rule: send the VIN/serial where available, the complete original part number and clear photographs of the original component whenever any suffix or configuration is uncertain.

Package Contents

One REEDMORAL throttle body component as photographed. Gaskets, seals, sensors, injectors, brackets, valves, studs and mounting hardware are included only when they are visibly shown in this product’s gallery or expressly listed in the order confirmation.

Research Sources and Confidence Boundary

• Source 1: dormanproducts.com
• Source 2: autozone.com
• Source 3: carparts.com

Evidence boundary: Moderate to high for the recorded reference identity; year, market, engine and physical configuration still require VIN/sample verification. Vehicle-name overlap, appearance similarity or a single seller listing is not used by itself to prove OEM interchange.