LDH228B REEDMORAL Carburetor Assembly 180-6458 10-10077 8302 for AMC passenger applications | 1982-1988 commonly catalogued ran

Product Overview

LDH228B is a brand-new REEDMORAL carburetor assembly manufactured for replacement-part supply. It is not used, remanufactured or represented as a vehicle-maker original component.

This page is indexed around the complete recorded reference identity and the researched application terms. Because similar-looking carburetor components may differ by suffix, calibration, connector, actuator, port or mounting configuration, the original number and physical sample remain the controlling ordering checks.

• Core application: AMC passenger applications | 1982-1988 commonly catalogued range | 258 cu in / 4.2L inline-six | Must use compatible electronic feedback controls Jeep CJ / Cherokee / Wagoneer | 1982-1990 commonly listed range | 258 cu in / 4.2L inline-six | Verify feedback connector, choke and emissions layout
• Condition: Brand new REEDMORAL replacement
• Verification date: 2026-08-31

Key Specifications / Configuration

OEM & Identification Numbers

Confirmed recorded primary reference: 180-6458, 10-10077

Confirmed recorded secondary reference: 8302, 8338, 8339, 8360, 8362, 8364, 8383

Additional catalogue-supported candidate identification numbers: None added. No unverified seller-only number is presented as interchangeable.

Search-format variants (same characters with punctuation removed; not new interchange numbers): 1806458, 1010077

The confirmed references above are copied from the locked product record. Candidate numbers are separated deliberately and are included only when a manufacturer/supplier model set or multiple independent catalogues support the association. They must still be checked against the full original marking.

Application and Year Fitment Guide

The guide consolidates the recorded product data and catalogue research. Fitment varies by market, VIN or serial number, engine, production date, emissions package and physical configuration; it is not an unconditional interchange statement.

Physical Identification Checklist

• Match the complete carburetor number, casting/air-horn markings and suffix before ordering.
• Compare mounting flange, bore count, choke type, linkage direction, fuel inlet and vacuum/vent ports.
• Confirm engine, fuel type/calibration, transmission, emissions market and production date where applicable.
• Check jetting and adjustment against the vehicle/equipment service specification; visual similarity alone is not interchange proof.

Installation and Ordering Notes

• Flush the fuel line, replace contaminated filters and use the correct gasket/insulator before installation.
• Set float level, idle mixture, choke and linkage only to the applicable engine/service specification.
• Check for fuel and vacuum leaks after installation; final calibration may be required for altitude, fuel and engine condition.

Ordering rule: send the VIN/serial where available, the complete original part number and clear photographs of the original component whenever any suffix or configuration is uncertain.

Package Contents

One REEDMORAL carburetor component as photographed. Gaskets, seals, sensors, injectors, brackets, valves, studs and mounting hardware are included only when they are visibly shown in this product’s gallery or expressly listed in the order confirmation.

Research Sources and Confidence Boundary

• Source 1: theskillsphere.com
• Source 2: summitracing.com

Evidence boundary: Moderate to high for the recorded reference identity and stated catalogue application; exact year, market, engine, calibration and physical configuration still require VIN/sample verification. Vehicle-name overlap, appearance similarity or a single seller listing is not used by itself to prove OEM interchange.