J1444 REEDMORAL Electronic Throttle Body 037133064 for VW Golf III Vento Passat Corrado SEAT 2.0L

Product Overview

The J1444 is a brand-new REEDMORAL electronic throttle body assembly manufactured as a new replacement component. It is not used, rebuilt, remanufactured, OEM-branded or represented as a vehicle-maker original part.

Key Specifications / Configuration

• Brand: REEDMORAL
• SKU: J1444
• Product type: Electronic Throttle Body Assembly
• Condition: Brand new
• Application evidence: [Research verification 2026-09-02] Confirmed primary reference supplied for this record: 037133064. Application research: Selected Volkswagen and SEAT 2.0L petrol applications using the 037133064 / 408237111002Z configuration. Fitment guide: – VW Golf III/Vento/Passat/Corrado; SEAT Cordoba/Ibiza II/Toledo I | Commonly 1988-2002 depending on model | Selected 2.0L petrol engines including AGG/2E where catalogued | Match the complete reference, connector, cable linkage, idle actuator and mounting flange Possible matching OEM/catalogue numbers – verification required: 408237111002Z, 37133064. Mandatory ordering checks: match the complete original number including every suffix, VIN, engine code, electrical connector, mounting pattern, bore/port orientation and actuator configuration. Vehicle name or appearance alone is not sufficient. Research source: https://pub-mediabox-storage.rxweb-prd.com/exhibitor/document/exh-01b93e4c-7438-4b46-b66d-65ee8a1a2f36/162e8f83-85bd-4729-85da-d626816c1340.pdf; Electronic throttle body assembly identified by the protected 037133064 reference for selected Volkswagen and SEAT 2.0L petrol applications. Catalogue coverage includes selected VW Golf III, Vento, Passat and Corrado plus SEAT Cordoba, Ibiza II and Toledo I configurations, with model-year and engine-code boundaries varying by market. Confirm the complete original number, VIN, engine code, electrical connector, cable/linkage configuration, idle-control arrangement, mounting flange, bore and hose-port layout.
• Reference baseline: 037133064

OEM & Identification Numbers

Locked confirmed reference set used for this listing: 037133064

Common search forms: 037133064

Possible / Candidate OEM and Identification References

Possible / Candidate OEM References: none promoted. Single-seller suggestions, search snippets without independent support and appearance-only matches were excluded.

Special notice: candidate numbers are search and pre-fitment clues only. They are displayed separately from the confirmed reference baseline, must be checked against the full number, VIN and physical configuration, and are not written back into the locked Jiandaoyun reference fields.

Application and Year Fitment Guide

[Research verification 2026-09-02] Confirmed primary reference supplied for this record: 037133064. Application research: Selected Volkswagen and SEAT 2.0L petrol applications using the 037133064 / 408237111002Z configuration. Fitment guide: – VW Golf III/Vento/Passat/Corrado; SEAT Cordoba/Ibiza II/Toledo I | Commonly 1988-2002 depending on model | Selected 2.0L petrol engines including AGG/2E where catalogued | Match the complete reference, connector, cable linkage, idle actuator and mounting flange Possible matching OEM/catalogue numbers – verification required: 408237111002Z, 37133064. Mandatory ordering checks: match the complete original number including every suffix, VIN, engine code, electrical connector, mounting pattern, bore/port orientation and actuator configuration. Vehicle name or appearance alone is not sufficient. Research source: https://pub-mediabox-storage.rxweb-prd.com/exhibitor/document/exh-01b93e4c-7438-4b46-b66d-65ee8a1a2f36/162e8f83-85bd-4729-85da-d626816c1340.pdf; Electronic throttle body assembly identified by the protected 037133064 reference for selected Volkswagen and SEAT 2.0L petrol applications. Catalogue coverage includes selected VW Golf III, Vento, Passat and Corrado plus SEAT Cordoba, Ibiza II and Toledo I configurations, with model-year and engine-code boundaries varying by market. Confirm the complete original number, VIN, engine code, electrical connector, cable/linkage configuration, idle-control arrangement, mounting flange, bore and hose-port layout.

Physical Identification Checklist

• Connector housing, pin count and keying
• Throttle bore, plate orientation and actuator housing position
• Mounting-hole pattern, flange outline and gasket face
• Coolant, vacuum or breather ports and hose-nipple direction

Installation and Ordering Notes

Confirm the complete reference character by character and compare all gallery views before ordering. Fitment can vary by market, VIN, engine code, production date and physical configuration. Professional installation is recommended. Electronic throttle bodies may require the vehicle-maker’s relearn procedure; cable-drive units require throttle-cable travel, blade-clearance and TPS/IAC calibration checks.

Package Contents

One REEDMORAL replacement component as photographed.

Catalogue Research and Confidence Boundary

• Gauss electronic throttle body catalogue covering 037133064 applications (component manufacturer catalogue)
• Electronic throttle body application catalogue mirror for 037133064 (professional technical catalogue)
• 037133064 product configuration image source (supplier product listing)

The protected Jiandaoyun reference 037133064 remains the identity baseline. Technical catalogues support the Volkswagen and SEAT 2.0L application family. No additional OEM or supplier number is promoted in this publication because the evidence was not treated as a second confirmed vehicle-maker reference.