LDH806 REEDMORAL Carburetor Assembly 495181 for Reference-specific application

Product Overview

LDH806 is a brand-new REEDMORAL carburetor assembly manufactured for replacement-part supply. It is not used, remanufactured or represented as a vehicle-maker original component.

This page is indexed around the complete recorded reference identity and the researched application terms. Because similar-looking carburetor components may differ by suffix, calibration, connector, actuator, port or mounting configuration, the original number and physical sample remain the controlling ordering checks.

• Core application: Reference-specific application identified by 495181. Catalogue search confirms the recorded product family but does not establish a complete vehicle/year interchange set; verify the full number, engine and physical configuration.
• Condition: Brand new REEDMORAL replacement
• Verification date: 2026-08-31

Key Specifications / Configuration

OEM & Identification Numbers

Confirmed recorded primary reference: 495181

Confirmed recorded secondary reference: No public secondary reference is listed; supplier-internal identifiers are intentionally excluded.

Additional catalogue-supported candidate identification numbers: None added. No unverified seller-only number is presented as interchangeable.

Search-format variants (same characters with punctuation removed; not new interchange numbers): Use the exact punctuated reference shown above.

The confirmed references above are copied from the locked product record. Candidate numbers are separated deliberately and are included only when a manufacturer/supplier model set or multiple independent catalogues support the association. They must still be checked against the full original marking.

Application and Year Fitment Guide

The guide consolidates the recorded product data and catalogue research. Fitment varies by market, VIN or serial number, engine, production date, emissions package and physical configuration; it is not an unconditional interchange statement.

Physical Identification Checklist

• Match the complete carburetor number, casting/air-horn markings and suffix before ordering.
• Compare mounting flange, bore count, choke type, linkage direction, fuel inlet and vacuum/vent ports.
• Confirm engine, fuel type/calibration, transmission, emissions market and production date where applicable.
• Check jetting and adjustment against the vehicle/equipment service specification; visual similarity alone is not interchange proof.

Installation and Ordering Notes

• Flush the fuel line, replace contaminated filters and use the correct gasket/insulator before installation.
• Set float level, idle mixture, choke and linkage only to the applicable engine/service specification.
• Check for fuel and vacuum leaks after installation; final calibration may be required for altitude, fuel and engine condition.

Ordering rule: send the VIN/serial where available, the complete original part number and clear photographs of the original component whenever any suffix or configuration is uncertain.

Package Contents

One REEDMORAL carburetor component as photographed. Gaskets, seals, sensors, injectors, brackets, valves, studs and mounting hardware are included only when they are visibly shown in this product’s gallery or expressly listed in the order confirmation.

Research Sources and Confidence Boundary

• Source 1: mm-products.com
• Source 2: partstree.com
• Source 3: mowerpartsland.com

Evidence boundary: Moderate to high for the recorded reference identity and stated catalogue application; exact year, market, engine, calibration and physical configuration still require VIN/sample verification. Vehicle-name overlap, appearance similarity or a single seller listing is not used by itself to prove OEM interchange.

Additional Application and Configuration Details

PartsTree identifies 495181 as a carburetor superseded to 693480 and lists selected 1997 AYP and Wizard lawn-tractor equipment records.

Possible Matching OEM Numbers / Verification Required

These are catalogue-based candidate identification numbers, not unconditional REEDMORAL interchange guarantees. Confirm the VIN or engine model/type/code, complete original number, connector, ports and mounting before ordering. They are separate from the established reference numbers above.

Equipment-model listings do not prove fitment to every engine installed in the same tractor family.

REEDMORAL supplies a newly manufactured aftermarket replacement part. Vehicle and engine manufacturer names are used for identification only; source-catalogue branding, warranties and package contents do not describe the REEDMORAL offer.

Catalogue Sources and Verification

• https://www.partstree.com/parts/briggs-stratton-495181/
• https://mm-products.com/products/engine-parts/carburetors/carburetors-parts-kit/genuine-briggs-stratton-693480-carburetor-499306-495181-495026-491429/

Catalogue review date: 2026-09-15. Fitment remains configuration- and market-specific.