- Brand: REEDMORAL
- SKU: LDH157
- Product Type: Carburetor assembly
- Application: Classic Ford flathead V8 and traditional hot-rod applications using a three-bolt Stromberg 97-pattern two-barrel intake setup
- Reference Numbers: Stromberg 97, Genuine 97
LDH157 REEDMORAL Stromberg 97 Two-Barrel Carburetor for Ford Flathead V8
Description
Product Overview
The LDH157 is a brand-new REEDMORAL carburetor assembly, newly manufactured rather than rebuilt or remanufactured.
- Application: Classic Ford flathead V8 and traditional hot-rod applications using a three-bolt Stromberg 97-pattern two-barrel intake setup
- Reference Numbers: Stromberg 97, Genuine 97
- Configuration: Three-bolt two-barrel downdraft Stromberg 97-pattern carburetor; linkage, fuel inlet, jetting and single- or multi-carb setup require confirmation
Application and Fitment Guide
Published Stromberg history records the model 97 on Ford 85 hp V8 applications from 1936 to early 1938, and Genuine Stromberg documentation treats installation as configuration dependent. Custom hot-rod use is common, but manifold, linkage, fuel pressure and calibration must be matched. The former Lada 2107-1107010-20 tag was unrelated and was removed.
| Make / Model | Year / Period | Engine | Required Check |
|---|---|---|---|
| Ford passenger vehicles with 85 hp flathead V8 | 1936 to early 1938 original-equipment family | Ford flathead V8 | Confirm a Stromberg 97-pattern three-bolt manifold and the complete linkage / fuel-line arrangement |
| Traditional Ford flathead hot rods | Custom single- or multi-carburetor setup | Flathead V8; build specific | Select jetting, power valve, linkage, fuel pressure and air cleaners for the engine combination |
| Custom vintage performance applications | No universal vehicle-year fitment | Manifold and calibration dependent | Verify three-bolt flange, throttle direction, choke, clearance and intended calibration |
How to Confirm Fitment
- Match the complete original carburetor or reference number.
- Confirm vehicle, engine, production period and fuel type.
- Compare choke type, flange, linkage, vacuum ports and emissions fittings.
- Use the product photographs to verify the complete external configuration.
Important Notes
Reference numbers are supplied for identification. Market, emissions and production changes can alter calibration and external equipment. Professional installation and final adjustment are recommended.
Factory Calibration Specifications
Factory-recorded baseline jet and venturi specifications. Values are shown as recorded in the production data; final tuning may vary with engine setup, altitude, fuel and local conditions.
| Carburetor Type | 97stromberg |
|---|---|
| Emulsion Tube | — |
| Pump Jet | 90 |
| Needle Valve | 2.1 |
| Idle Jet | 78 |
| Main Jet | 115 |
| Main Air Jet | 95 |
| Venturi (Choke Tube) | 26 |
| Auxiliary Venturi | 10.5 |
Additional information
| Weight | 2.8 kg |
|---|---|
| Dimensions | 28 × 25 × 19 cm |
| Reference | 97 |
You must be logged in to post a review.
Reviews
There are no reviews yet.